Post Setup Wizard Configuration Steps (Magic xpi 4.9)

Configuring the Windows Service User

In all of the application servers, go to the Services control panel and change the service user to a user with enough privileges to access all resources required by the project. For example, the user should have permission to read and write to the network drive holding the projects.

Configuring the Internal Database

In all of the application servers except the first one (where the setup program already configured this property), modify the <Magic xpi installation>\Runtime\config\datasource.xml file to match the first installed server.

Installing the Server License

Magic xpi 4.x requires a license to run:

1. Copy the license file that you received after purchase, and copy it to all of the servers, or to the shared location.

2. For all three servers, modify the Magic.ini file with the license file location by updating the [MAGIC_ENV] LicenseFile entry to point to the shared license file.
   For example: LicenseFile =\\10.1.1.6\licenses\License.dat

3. Make sure that your project’s ifs.ini file is configured with the production license (i.e. [MAGIC_ENV]LicenseName = IBPRSRVI for a Windows machine).

Configuring Multiple Network Cards (Optional)

If your application servers have multiple network cards, configure the use of a specific card for the Magic xpi 4.x server, as follows:

1. Modify the NIC_ADDR value found in the <Magic xpi installation>\Runtime\GigaSpaces-xpi\bin\magicxpi-setenv.bat file to hold either the IP assigned to this network card or the name of the network card itself.
   For example: NIC_ADDR=10.1.1.11 or NIC_ADDR="#eth0:ip#", where eth0 is the name of the network card.
   
   

2. Add the NIC_ADDR value to the Magic.ini file’s jvm_args section: -Djava.rmi.server.hostname=<your network card IP address here>