The following table lists the methods and parameters that can be used. Parameters in bold are mandatory.
|
|
|
|
|
Delete File from FTP scans an FTP server and deletes indicated files.
|
Source Directory Location
|
Enter the location of the FTP directory to scan.
|
|
Include Subdirectories
|
Select one of the following from the drop-down list to indicate whether Directory Scanner will scan the subdirectories of the selected directory:
|
|
Filter
|
Enter the names of files or groups of files that should be watched. You can use wildcard characters when entering this criteria. For example, if you want to watch only files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Exclude
|
Enter the names of files or groups of files that should not be scanned. You can use wildcard characters when entering this criteria. For example, if you want to exclude all files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Timeout
|
Define the time (in seconds) during which the flow component should perform the scan (only available in Step mode). If no file is created before the timeout period ends, the flow will move to the next step.
|
|
A timeout of 0 indicates that the Directory Scanner will not wait for any amount
of time (no timeout). In other words, if a file is not created immediately, the flow
moves to the next step without waiting. A timeout with a negative number indicates
that the Directory Scanner will wait indefinitely until a file is created.
|
|
|
Order
|
Select one of the following from the drop-down list to indicate the order in which the directories are scanned:
|
|
Criteria
|
Select one of the following from the drop-down list to indicate the scanning criteria:
|
|
Order Operator
|
Select one of the following from the drop-down list to indicate the order of the scanned files if the Criteria parameter (above) is Size or TimeStamp:
-
Greater than
-
Less than
-
Equal to
|
|
File Size
|
Enter the file size (in bytes) if the Criteria parameter is Size.
|
|
File Date
|
Enter the file date (DD/MM/YYYY) if the Criteria parameter is TimeStamp.
|
|
File Time
|
Enter the file time (HH:MM:SS) if the Criteria parameter is TimeStamp.
|
|
When working with an FTP server, seconds are not considered in the time criteria
for the time stamp.
|
|
|
Polling Interval
|
Enter the time interval (in milliseconds) that the Directory Scanner will use to scan directories. For example, if you enter 1000 milliseconds, the Directory Scanner will scan the directory every second.
The default is 3000 milliseconds.
|
|
Log Type
|
Determines the format of the generated log file. Select one of the following from the drop-down list:
|
|
Log File Name
|
Enter the name of the log file if one is returned.
|
|
Return File To
|
Click  to open the Variables List. Select where the file being scanned for is returned. The file can be returned to a variable defined by the user or to a User BLOB.
|
|
Return Filename To
|
Click to open the Variables List. Select where the filename is returned if you are moving or renaming a file. The file can be returned to a variable defined by the user or to a User String.
|
|
Error Code
|
A Directory Scanner error code.
Click to open the Variables List. Select a variable where the error code is returned, and then click Select.
|
|
Delete File from LAN scans a local directory and deletes the indicated files.
|
Source Directory Location
|
Enter the location of the local directory to scan.
|
|
Include Subdirectories
|
Select one of the following from the drop-down list to indicate whether the Directory Scanner will scan the subdirectories of the selected directory:
|
|
Filter
|
Enter the names of files or groups of files that be watched. You can use wildcard characters when entering this criteria. For example, if you want to watch only files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Exclude
|
Enter the names of files or groups of files that should not be scanned. You can use wildcard characters when entering this criteria. For example, if you want to exclude all files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Timeout
|
Define the time (in seconds) during which the flow component should perform the scan (only available in Step mode). If no file is created before the timeout period ends, the will move to the next step.
|
|
A timeout of 0 indicates that the Directory Scanner will not wait for any amount
of time (no timeout). In other words, if a file is not created immediately, the flow
moves to the next step without waiting. A timeout with a negative number indicates
that the Directory Scanner will wait indefinitely until a file is created.
|
|
|
Order
|
Select one of the following from the drop-down list to indicate the order in which the directories are scanned:
|
|
Criteria
|
Select one of the following from the drop-down list to indicate the scanning criteria:
|
|
Order Operator
|
Select one of the following from the drop-down list to indicate the order of the scanned files if the Criteria parameter (above) is Size or TimeStamp:
-
Greater than
-
Less than
-
Equal to
|
|
File Size
|
Enter the file size (in bytes) if the Criteria parameter is Size.
|
|
File Date
|
Enter the file date (DD/MM/YYYY) if the Criteria parameter is TimeStamp.
|
|
File Time
|
Enter the file time (HH:MM:SS) if the Criteria parameter is TimeStamp.
|
|
Polling Interval
|
Enter the time interval (in milliseconds) that the Directory Scanner will use to scan directories. For example, if you enter 1000 milliseconds, the Directory Scanner will scan the directory every second.
The default is 3000 milliseconds.
|
|
Log Type
|
Determines the format of the generated log file. Select one of the following from the drop-down list:
|
|
Log File Name
|
Enter the name of the log file if one is returned.
|
|
Return File To
|
Click to open the Variables List. Select a variable where the file being scanned for is returned. The file can be returned to a variable defined by the user or to a User BLOB.
|
|
Return Filename To
|
Click to open the Variables List. Select a variable where the filename is returned if you are moving or renaming a file. The file can be returned to a variable defined by the user or to a User String.
|
|
Error Code
|
A Directory Scanner error code.
Click to open the Variables List. Select a variable where the error code is returned, and then click Select.
|
|
FTP to LAN scans directories on an FTP server and moves indicated files to a LAN.
|
Source Directory Location
|
Enter the location of the FTP directory to scan.
|
|
Include Subdirectories
|
Select one of the following from the drop-down list to indicate whether Directory Scanner will scan the subdirectories of the selected directory:
|
|
Filter
|
Enter the names of files or groups of files that be watched. You can use wildcard characters when entering this criteria. For example, if you want to watch only files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
FTP Transfer Mode
|
This property lets you determine in which format your files are transferred. The choices are:
|
|
Exclude
|
Enter the names of files or groups of files that should not be scanned. You can use wildcard characters when entering this criteria. For example, if you want to exclude all files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Timeout
|
Define the time (in seconds) during which the flow component should perform the scan (only available in Step mode). If no file is created before the timeout period ends, the flow will move to the next step.
|
|
A timeout of 0 indicates that the Directory Scanner will not wait for any amount
of time (no timeout). In other words, if a file is not created immediately, the flow
moves to the next step without waiting. A timeout with a negative number indicates
that the Directory Scanner will wait indefinitely until a file is created.
|
|
|
Destination Directory Location
|
Enter the location of the local directory to where the files are moved.
|
|
Mask
|
Enter the structure for the name of the moved file or the renamed file. You can use wildcard characters. For example:
-
If you want all files to have the same suffix, you can enter *.txt and all files will be saved in the destination directory with their original name and the .txt suffix.
-
If you want all files to take only the first two letters of the original name, enter ??.* to create files with their original suffix and only the first two letters of the original name.
|
|
Order
|
Select one of the following from the drop-down list to indicate the order in which the directories are scanned:
|
|
Criteria
|
Select one of the following from the drop-down list to indicate the scanning criteria:
|
|
Order Operator
|
Select one of the following from the drop-down list to indicate the order of the scanned files if the Criteria parameter (above) is Size or TimeStamp:
-
Greater than
-
Less than
-
Equal to
|
|
File Size
|
Enter the file size (in bytes) if the Criteria parameter is Size.
|
|
File Date
|
Enter the file date (DD/MM/YYYY) if the Criteria parameter is TimeStamp.
|
|
File Time
|
Enter the file time (HH:MM:SS) if the Criteria parameter is TimeStamp.
|
|
When working with an FTP server, seconds are not considered in the time criteria
for the time stamp.
|
|
|
Polling Interval
|
Enter the time interval (in milliseconds) that the Directory Scanner will use to scan directories. For example, if you enter 1000 milliseconds, the Directory Scanner will scan the directory every second.
The default is 3000 milliseconds.
|
|
Log Type
|
Determines the format of the generated log file. Select one of the following from the drop-down list:
|
|
Log File Name
|
Enter the name of the log file if one is returned.
|
|
Return File To
|
Click to open the Variables List. Select a variable where the file being scanned for is returned. The file can be returned to a variable defined by the user or to a User BLOB.
|
|
Return Destination Filename To
|
Click to open the Variables List. Select a variable where the filename is returned if you are moving or renaming a file. The file can be returned to a variable defined by the user or to a User String.
|
|
Return Source Filename To
|
Click to open the Variables List. Select a variable that returns the name of the original file that was copied or moved.
|
|
Error Code
|
A Directory Scanner error code.
Click to open the Variables List. Select a variable where the error code is returned, and then click Select.
|
|
LAN to LAN scans a local directory and moves indicated files to another directory on the local server.
|
Source Directory Location
|
Enter the location of the local directory to scan.
|
|
Include Subdirectories
|
Select one of the following from the drop-down list to indicate whether the Directory Scanner will scan the subdirectories of the selected directory:
|
|
Filter
|
Enter the names of files or groups of files to be watched. You can use wildcard characters when entering this criteria.
For example, if you want to watch only files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Exclude
|
Enter the names of files or groups of files that should not be scanned. You can use wildcard characters when entering this criteria. For example, if you want to exclude all files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Timeout
|
Define the time (in seconds) during which the flow component should perform the scan (only available in Step mode). If no file is created before the timeout period ends, the flow will move to the next step.
|
|
A timeout of 0 indicates that the Directory Scanner will not wait for any amount
of time (no timeout). In other words, if a file is not created immediately, the flow
moves to the next step without waiting. A timeout with a negative number indicates
that the Directory Scanner will wait indefinitely until a file is created.
|
|
|
Destination Directory Location
|
Enter the location of the directory where the files are moved to.
|
|
Mask
|
Enter the structure for the name of the moved file or the renamed file. You can use wildcard characters. For example:
-
If you want all files to have the same suffix, you can enter *.txt and all files will be saved in the destination directory with their original name and the .txt suffix.
-
If you want all files to take only the first two letter of the original name, enter ??.* to create files with their original suffix and only the first two letters of the original name.
|
|
Order
|
Select one of the following from the drop-down list to indicate the order that the directories are scanned:
|
|
Criteria
|
Select one of the following from the drop-down list to indicate the scanning criteria:
|
|
Order Operator
|
Select one of the following from the drop-down list to indicate the order of the scanned files if the Criteria parameter (above) is Size or TimeStamp:
-
Greater than
-
Less than
-
Equal to
|
|
File Size
|
Enter the file size (in bytes) if the Criteria parameter is Size.
|
|
File Date
|
Enter the file date (DD/MM/YYYY) if the Criteria parameter is TimeStamp.
|
|
File Time
|
Enter the file time (HH:MM:SS) if the Criteria parameter is TimeStamp.
|
|
Polling Interval
|
Enter the time interval (in milliseconds) that the Directory Scanner will use to scan directories. For example, if you enter 1000 milliseconds, the Directory Scanner will scan the directory every second.
The default is 3000 milliseconds.
|
|
Log Type
|
Determines the format of the generated log file. Select one of the following from the drop-down list:
|
|
Log File Name
|
Enter the name of the log file if one is returned.
|
|
Return File To
|
Click to open the Variables List. Select a variable where the file being scanned for is returned. The file can be returned to a variable defined by the user or to a User BLOB.
|
|
Return Destination Filename To
|
Click to open the Variables List. Select a variable where the filename is returned if you are moving or renaming a file. The file can be returned to a variable defined by the user or to a User String.
|
|
Return Source Filename To
|
Click to open the Variables List. Select a variable that returns the name of the original file that was copied or moved.
|
|
Error Code
|
A Directory Scanner error code.
Click to open the Variables List. Select a variable where the error code is returned, and then click Select.
|
|
Rename File in FTP scans the FTP server and renames selected files.
|
Source Directory Location
|
Enter the location of the FTP directory to scan.
|
|
Include Subdirectories
|
Select one of the following from the drop-down list to indicate whether Directory Scanner will scan the subdirectories of the selected directory:
|
|
Filter
|
Enter the names of files or groups of files that be watched. You can use wildcard characters when entering this criteria. For example, if you want to watch only files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
FTP Transfer Mode
|
This property lets you determine in which format your files are transferred. The choices are:
|
|
Exclude
|
Enter the names of files or groups of files that should not be scanned. You can use wildcard characters when entering this criteria. For example, if you want to exclude all files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Timeout
|
Define the time (in seconds) during which the flow component should perform the scan (only available in Step mode). If no file is created before the timeout period ends, the flow will move to the next step.
|
|
A timeout of 0 indicates that the Directory Scanner will not wait for any amount
of time (no timeout). In other words, if a file is not created immediately, the flow
moves to the next step without waiting. A timeout with a negative number indicates
that the Directory Scanner will wait indefinitely until a file is created.
|
|
|
Mask
|
Enter the structure for the name of the moved file or the renamed file. You can use wildcard characters. For example:
-
If you want all files to have the same suffix, you can enter *.txt and all files will be saved in the destination directory with their original name and the .txt suffix.
-
If you want all files to take only the first two letters of the original name, enter ??.* to create files with their original suffix and only the first two letters of the original name.
|
|
Order
|
Select one of the following from the drop-down list to indicate the order in which the directories are scanned:
|
|
Criteria
|
Select one of the following from the drop-down list to indicate the scanning criteria:
|
|
Order Operator
|
Select one of the following from the drop-down list to indicate the order of the scanned files if the Criteria parameter (above) is Size or TimeStamp:
-
Greater than
-
Less than
-
Equal to
|
|
File Size
|
Enter the file size (in bytes) if the Criteria parameter is Size.
|
|
File Date
|
Enter the file date (DD/MM/YYYY) if the Criteria parameter is TimeStamp.
|
|
File Time
|
Enter the file time (HH:MM:SS) if the Criteria parameter is TimeStamp.
|
|
When working with an FTP server, seconds are not considered in the time criteria
for the time stamp.
|
|
|
Polling Interval
|
Enter the time interval (in milliseconds) that the Directory Scanner will use to scan directories. For example, if you enter 1000 milliseconds, the Directory Scanner will scan the directory every second.
The default is 3000 milliseconds.
|
|
Log Type
|
Determines the format of the generated log file. Select one of the following from the drop-down list:
|
|
Log File Name
|
Enter the name of the log file if one is returned.
|
|
Return File To
|
Click to open the Variables List. Select a variable where the file being scanned for is returned. The file can be returned to a variable defined by the user or to a User BLOB.
|
|
Return Destination Filename To
|
Click to open the Variables List and select where the filename is returned if you are moving or renaming a file. The file can be returned to a variable defined by the user or a User String.
|
|
Return Source Filename To
|
Click to open the Variables List. Select a variable that returns the name of the original file that was copied or moved.
|
|
Error Code
|
A Directory Scanner error code.
Click to open the Variables List. Select a variable where the error code is returned, and then click Select.
|
|
Rename File in LAN renames indicated files on a local directory.
|
Source Directory Location
|
Enter the location of the local directory to scan
|
|
Include Subdirectories
|
Select one of the following from the drop-down list to indicate whether the Directory Scanner will scan the subdirectories of the selected directory:
|
|
Filter
|
Enter the names of files or groups of files to be watched. You can use wildcard characters when entering this criteria. For example, if you want to watch only files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Exclude
|
Enter the names of files or groups of files that should not be scanned. You can use wildcard characters when entering this criteria. For example, if you want to exclude all files that start with Customer, enter Customer * to indicate all files with the word customer and any other name after. The * wildcard character can be in any position.
You can enter more than one file, separating them with a comma. For example, *.txt,*.doc.
|
|
Timeout
|
Define the time (in seconds) during which the flow component should perform the scan (only available in Step mode). If no file is created before the timeout period ends, the will move to the next step.
|
|
A timeout of 0 indicates that the Directory Scanner will not wait for any amount
of time (no timeout). In other words, if a file is not created immediately, the flow
moves to the next step without waiting. A timeout with a negative number indicates
that the Directory Scanner will wait indefinitely until a file is created.
|
|
|
Mask
|
Enter the structure for the name of the moved file or the renamed file. You can use wildcard characters. For example:
-
If you want all files to have the same suffix, you can enter *.txt and all files will be saved in the destination directory with their original name and the .txt suffix.
-
If you want all files to take only the first two letter of the original name, enter ??.* to create files with their original suffix and only the first two letters of the original name.
|
|
Order
|
Select one of the following from the drop-down list to indicate the order that the directories are scanned:
|
|
Criteria
|
Select one of the following from the drop-down list to indicate the scanning criteria:
|
|
Order Operator
|
Select one of the following from the drop-down list to indicate the order of the scanned files if the Criteria parameter (above) is Size or TimeStamp:
-
Greater than
-
Less than
-
Equal to
|
|
File Size
|
Enter the file size (in bytes) if the Criteria parameter is Size.
|
|
File Date
|
Enter the file date (DD/MM/YYYY) if the Criteria parameter is TimeStamp.
|
|
File Time
|
Enter the file time (HH:MM:SS) if the Criteria parameter is TimeStamp.
|
|
Polling Interval
|
Enter the time interval (in milliseconds) that the Directory Scanner will use to scan directories. For example, if you enter 1000 milliseconds, the Directory Scanner will scan the directory every second.
The default is 3000 milliseconds.
|
|
Log Type
|
Determines the format of the generated log file. Select one of the following from the drop-down list:
|
|
Log File Name
|
Enter the name of log file if one is returned.
|
|
Return File To
|
Click to open the Variables List. Select a variable where the file being scanned for is returned. The file can be returned to a variable defined by the user or to a User BLOB.
|
|
Return Destination Filename To
|
Click to open the Variables List. Select a variable where the filename is returned if you are moving or renaming a file. The file can be returned to a variable defined by the user or to a User String.
|
|
Return Source Filename To
|
Click to open the Variables List. Select a variable that returns the name of the original file that was copied or moved.
|
|
Error Code
|
A Directory Scanner error code.
Click to open the Variables List. Select a variable where the error code is returned, and then click Select.
|
